CG-BGA-5016 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Orientation Mark
1.8875
21.225±0.125
No component area
14.95 (x4)
37.225±0.125
Socket base size
5.08
1.250±0.125 (x4)
1.250±0.125 (x4)
2.1375 *
*Note: BGA pattern is not symmetrical with respect
to the mounting holes. The pattern is shifted to the
right of center by 0.25mm.
0.65 typ.
1.6375 *
Note: Full BGA pattern shown.
Please adjust pattern according to
individual requirement.
2.54
0.85±0.05 (x2)
Non plated alignment hole
0.29 pad
1.71±0.10 (x4)
Non plated mounting hole
Max Component Ht. 13.2mm
Target PCB Recommendations
18.725±0.050 (x4)
21.225±0.125
Max Component Ht. 1.6mm
Total thickness: 1.6mm min.
Socket base size
Plating: Gold or Solder finish
22.725±0.125 (x4)
Max Component Ht. 0.5mm--close latch
Backing plate
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Max Component Ht. 1.4mm--open latch
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-BGA-5016 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 68.74
STATUS: Released
DRAWN BY: S. Huang
FILE: CG-BGA-5016
SHEET: 2 OF 4
SCALE: 2.8:1
DATE: 9/14/12
REV. A