CG-BGA-5006 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
2.0375mm
Orientation Mark
20.225mm±0.125mm ^sqr.
Socket size
5.08mm
2.2875mm*
0.65mm typ.
*Note: BGA pattern is not symmetrical
with respect to the mounting holes. It is
offset by 0.25mm to the right of center
with respect to the mounting holes.
2.54mm
Ø 0.850mm±0.025mm ^(x2)
Non plated alignment hole
Ø 0.36mm pad. (x 484)
1.250mm±0.125mm ^(x4)
Ø 1.610mm±0.050mm ^(x4)
Non plated mounting hole
Target PCB Recommendations
Total thickness: 1.5mm min.
Plating: Gold or Solder finish
CG-BGA-5006 Drawing
© 2009 IRONWO^.OD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
13.65mm
17.725mm (x4)
1.250mm±0.125mm ^(x4)
22.73mm backing plate
DXF DATA WILL BE PROVIDED
Status: Released
Scale: 3:1
Rev: A
Drawing: Vinayak R
File: CG-BGA-5006 Dwg
Date: 8/31/09
Modified:
Recommended PCB Layout Tolerances:
±0.025mm [±0.001”] unless stated otherwise.
PAGE 2 of 5