CG-BGA-5004 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
*3.3625mm
Orientation Mark
0.65mm typ.
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
2.8625mm
11x11 array
3.1125mm
6.50mm
5.08mm
1.250mm±0.125mm (x4)
1.250mm±0.125mm (x4)
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
CG-BGA-5004 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
2.54mm
30.25mm
Ø 0.850mm±0.025mm (x2)
Non plated Alignment Hole
Ø 0.35mm PAD (x121)
6.50mm
12.725mm (x4)
Ø 1.75mm±0.05mm (x4)
Non plated Mounting Hole
Socket Lid Size
25.48mm
All dimensions are in mm unless stated otherwise
Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise.
Status: Released
Drawing: S.Natarajan
File: CG-BGA-5004 Dwg.mcd
Scale: 4:1
Rev: B
Date: 04/02/2010
Modified: 09/17/14
Recommended PCB Layout Tolerances:
±0.025mm [±0.001”] unless stated otherwise.
PAGE 2 of 4