CG-BGA-4012 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
Orientation Mark
1.25mm±0.13mm(x4)
2.6125mm
42.725mm±0.125mm
Socket size
1.25mm±0.13mm(x4)
2.9875mm*
1mm typ.
*Note: BGA pattern is shifted to the right by 0.375mm
with respect to the mounting holes.
2.54mm
Ø 0.85mm±0.025mm(x2)
Non plated alignment hole
2.5mm±0.13mm
5.08mm
Ø 0.51mm pad (x1296)
2.5mm±0.13mm
20.113mm(x8)
Ø 1.71mm±0.1mm (x8)
Non plated mounting hole
43.11mm
45.225mm (x4)
Backing plate size
Target PCB Recommendations
Total thickness: 2.4mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
NOTE: Steel backing plate may be required based on end user's application
Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise.
CG-BGA-4012 Drawing
© 2013 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Scale: -
Rev: A
Drawing: E Smolentseva
Date: 4/25/2013
File: CG-BGA-4012 Dwg
Modified:
PAGE 2 of 5