CG-BGA-4011 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
Orientation Mark
1.25mm±0.13mm (x4)
1.25mm±0.13mm (x4)
*3.1375mm
0.80mm typ.
*Note: BGA pattern is not symmetrical
with respect to the mounting holes. It is
offset by 0.375mm to the right of center
with respect to the mounting holes.
2.7625mm
7.20mm
Socket
Body Size
5.080mm
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
CG-BGA-4011 Drawing
© 2011 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
2.540mm
Ø 0.850mm±0.025mm (x2)
Non plated alignment hole
28.23mm
Ø 0.26mmPADS (x100)
7.20mm
12.725mm (x4)
Ø 1.75mm±0.05mm(x4)
Non plated mounting hole
15.225mm±0.125mm (x4)
17.73mm sqr.
backing plate outline
25.48mm
All dimensions are in mm unless stated otherwise
Status: Released
Scale: -
Rev: B
Drawing: E. Smolentseva
Date: 10/26/11
File: CG-BGA-4011 Dwg.mcd
Modified: 3/31/14
Recommended PCB Layout
Tolerances: ±0.025mm [±0.001”]
unless stated otherwise.
PAGE 2 of 4