CG-BGA-4010 Datasheet, PDF (2/3 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
Orientation Mark
*Note: BGA pattern is not symmetrical
with respect to the mounting holes. It is
offset by 0.375mm to the right of center
with respect to the mounting holes.
1.250mm±0.125mm(x4)
1.250mm±0.125mm(x4)
Socket
Body Size
2.163mm
5.080mm
2.538mm*
0.80mm typ.
2.540mm
Ø 0.850mm±0.025mm (x2)
Alignment Hole
Ø 0.36mmPAD
9.950mm
14.725mm(x4)
17.225mm±0.125mm (x4)
Ø 1.61mm±0.05mm(x4)
Mounting Hole
Target PCB Recommendations
Total thickness: 1.5mm min.
Plating: Gold or Solder finish
CG-BGA-4010 Drawing
© 2009 IRONWO. OD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
DXF DATA WILL BE PROVIDED
Status: Released
Drawing: M.A. Fedde
File: CG-BGA-4010 Dwg
Scale: 3:1
Rev: A
Date: 11/2/09
Modified:
Recommended PCB Layout Tolerances:
±0.025mm [±0.001”] unless stated otherwise.
PAGE 2 of 3