CG-BGA-4005 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
21.30mm
2.6375mm*
A1
24.61mm
2.2625mm
21.30mm
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
0.80mm
2.54mm
Target PCB Recommendations
Total thickness: 1.5mm min.
Plating: Gold or Solder finish
Ø 0.85mm (x2)
Alignment Hole
24.61mm
5.08mm
Socket Lid Outline
19.20mm(x4)
23.73mm±0.05mm(x4)
26.23mm±0.13mm(x4) Skt Base
Ø 1.71mm±0.10mm (x4)
Mounting Hole
Socket Base Outline
Scale: 1.25:1
DXF DATA WILL BE PROVIDED
28.73mm±0.13mm(x4) Backing Plate
Recommended PCB Layout Tolerances:
±0.025mm [±0.001”] unless stated otherwise.
CG-BGA-4005 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: Vinayak R
File: CG-BGA-4005 Dwg
Scale: 3:1
Rev: A
Date: 2/16/10
Modified:
PAGE 2 of 5