CG-BGA-4000 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Recommended PCB Layout
Top View
Orientation Mark
2.3625mm
2.7375mm*
45.225mm±0.125mm
Socket size
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
1.00mm typ.
2.54mm
Ø 0.850mm±0.025mm(x2)
Non plated alignment hole
Ø 0.635mm PAD
5.08mm
Target PCB Recommendations
Total thickness: 1.5mm min.
Plating: Gold or Solder finish
21.3625mm±0.0500mm(x8)
45.600mm±0.125mm
Socket size
47.725mm±0.125mm Sqr.
Backing plate size
DXF DATA WILL BE PROVIDED
Ø 1.61mm±0.05mm(x8)
Non plated mounting hole
Recommended PCB Layout Tolerances:
±0.025mm [±0.001”] unless stated otherwise.
CG-BGA-4000 Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J. Glab
File: CG-BGA-4000 Dwg
Scale: 3:1
Rev: A
Date: 01/11/08
Modified:
PAGE 2 of 4