XG-QFN-9001 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
12.225mm
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
12.225mm
Customer's QFN
10
XG-QFN-9001 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Ste 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
4
3
5
A
Recommended torque = 1.25 in. lbs.
(20 in. oz.)
9
2
8
7
6
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 3.0mm.}
Compression screw: Clear anodized Aluminum.
4 _{Thickness = 5mm, Hex socket = 3mm.}
High Frequency Elastomer:
5 _{Thickness = 0.35mm.}
Nylon washer: 1.73mm ID; 4.78mm OD
6 _{0.64mm thickness.}
7 ^{IC (MLF) Guide: Ultem1000}
Socket base screw: Socket head cap, Alloy steel with
8 ^{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid shoulder screw: Socket head cap, Alloy
9 steel 0-80 fine thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Status: Released
Drawing: Vinayak
File: XG-QFN-9001 Dwg.mcd
Scale: -
Rev: A
Date: 2/16/10
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3