TS-SS-21-2.5 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

Top View
Side View
22.27mm
TS-SS-21-X.X Drawing
Note: Screw needs to be calibrated for a
specific torque.
Use part numbers shown in the table
below to order appropriate screw
Ordering
Information
44.7
Ø 36
1
Part Number
TS-SS-21-2.5
TS-SS-21-3.0
TS-SS-21-3.5
TS-SS-21-4.0
TS-SS-21-4.5
TS-SS-21-5.0
TS-SS-21-5.5
TS-SS-21-6.0
TS-SS-21-6.5
TS-SS-21-7.0
Torque (in. lbs)
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
2
Laser Mark
Compression Screw Top: Clear anodized
1 Aluminum.
Compression Screw Bottom: Black anodized
2 _{Aluminum with M24 x1x6g Threads.}
M24x1x6g.
Description: Torque Indicating Screw
Torque screw for 2.5 in lbs -7 in lbs.
To be used with clamshell lid sockets
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Clamshell lid socket with Torque Indicating Screw
Note: Socket Not Included
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
TS-SS-21-X.X Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: V. Panavala
File: TS-SS-21-X_X Dwg
Scale: N/A
Rev: A
Date: 10/8/10
Modified: