TS-SS-12-0.5 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – To be used with clamshell sockets

Top View
18.41mm
Side View _{Laser Mark}
TS-SS-12-X.X Drawing
Note: Screw needs to be calibrated for a
specific torque.
Use part numbers shown in the table
below to order appropriate screw
33mm
1
2
M10x0.75x6g.
Compression Screw Top: Clear anodized
1 _Aluminum.
2 ^{Compression Screw Bottom: Black anodized}
Aluminum M10 x0.75x6g Thread.
Ordering
Information
Part Number
Torque (in. lbs)
TS-SS-12-0.5
0.5
TS-SS-12-1.0
1.0
TS-SS-12-1.5
1.5
TS-SS-12-2.0
2.0
TS-SS-12-2.5
2.5
TS-SS-12-3.0
3.0
TS-SS-12-3.5
3.5
TS-SS-12-4.0
4.0
TS-SS-12-4.5
4.5
TS-SS-12-5.0
5.0
Description: Torque Indicating Screw
Torque screw for 0.5 in lbs -5.2 in lbs.
To be used with clamshell sockets
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Clamshell lid socket with Torque Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
TS-SS-12-X.X Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: Vinayak R
File: TS-SS-12-X_X Dwg
Scale: -
Rev: C
Date: 6/4/08
Modified: 10/21/09