TS-SS-11-3.0 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – To be used with clamshell lid sockets

Top View
Side View
22.27mm
Laser Mark
TS-SS-11-X.X Drawing
Note: Screw needs to be calibrated for a specific
torque.
Use part numbers shown in the table below to
order appropriate screw
Ordering
Information
44.7
Ø 36
1
2
Part Number
TS-SS-11-3.0
TS-SS-11-3.5
TS-SS-11-4.0
TS-SS-11-4.5
TS-SS-11-5.0
TS-SS-11-5.5
TS-SS-11-6.0
TS-SS-11-6.5
TS-SS-11-7.0
TS-SS-11-7.5
TS-SS-11-8.0
TS-SS-11-8.5
TS-SS-11-9.0
TS-SS-11-9.5
TS-SS-11-10.0
Torque (in. lbs)
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
M18x1.5x6g.
Compression Screw Top: Clear anodized
1 Aluminum.
Compression Screw Bottom: Black anodized
2 _{Aluminum M18 x1.5x6g Thread. 5mm Thread ht.}
Description: Torque Indicating Screw
Torque screw for 3 in lbs -10.4 in lbs.
To be used with clamshell lid sockets
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Clamshell lid socket with Torque Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
TS-SS-11-X.X Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: Vinayak R
File: TS-SS-11-X_X Dwg
Scale: N/A
Rev: C
Date: 5/7/08
Modified: 4/12/10