TS-SS-03-0.5 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – To be used with Clamshell lid sockets

TS-SS-13-X.X Drawing
Note: Screw needs to be calibrated for a specific torque.
Use part numbers shown in the table below to order appropriate screw
Top View
14.6
Side View
Ø 18.6
1
2
Laser Mark
M6x1x6g.
Compression Screw Top: Clear anodized
1 _Aluminum.
2 ^{Compression Screw Bottom: Black anodized}
Aluminum M6 x1x6g Thread.
Ordering Information
Part Number
Torque (in. lbs)
TS-SS-03-0.5
0.5
TS-SS-03-0.75
0.75
TS-SS-03-1.0
1.0
TS-SS-03-1.25
1.25
TS-SS-03-1.5
1.5
TS-SS-03-1.75
1.75
TS-SS-03-2
2.0
Description:SS Type-Torque Indicating Screw
Torque screw for 0 in lbs -2.2 in lbs
To be used with Clamshell lid sockets.
Compression screw needs to be turned clockwise up to the point where the
arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Clamshell socket with Torque Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
TS-SS-13-X.X Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: Vinayak R
File: TS-SS-13-X_X Dwg
Scale: N/A
Rev: B
Date: 5/27/08
Modified: 8/10/09