TS-SG-03-03 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Primary dimension units are millimeters

PROPRIETARY AND CONFIDENTIAL - THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF IRONWOOD ELECTRONICS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF IRONWOOD ELECTRONICS, INC. IS PROHIBITED.
To be used with swivel lid sockets.
Compression screw needs to be turned clockwise
up to the point where the arrow on top of the
compression screw aligns with laser mark on the
compression screw bottom.
TOP VIEW
18.60
15.10
Laser Mark
FRONT VIEW
M6 screw
Description: Torque indicating compression screw, M6 thread
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0254mm [±0.001"],
substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"]
unless stated otherwise. Materials and specifications are subject to change without notice.
TS-SG-03-x.x Specification
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 8.36
Ordering Information
Part Number
Torque (in. lb)
TS-SG-03-03
0.3
TS-SG-03-0.4
0.4
TS-SG-03-0.5
0.5
TS-SG-03-0.75
0.75
TS-SG-03-1.0
1.0
TS-SG-03-1.25
1.25
TS-SG-03-1.5
1.5
TS-SG-03-1.75
1.75
TS-SG-03-2.0
2.0
ISO VIEW
Note: Torque indicating
screw requires calibration
at Ironwood to a specific
toque value.
Order by part # to obtain
the appropriate screw with
the correct torque value for
your application
Doc
Rev
Date
Initials Description
A 5/27/08 VP Original
B 8/10/09
VP
Added table to include additional
part numbers
C 9/21/12 ELS VW to SW conversion
D
1/21/14
ELS
Added TS-SG-03-0.3 and TS-SG-
03-0.4 to the table
STATUS: Released
ENG: E. Smolentseva
FILE: TS-SG-03-x.x
SHEET: 1 OF 1
DRAWN BY: E. Smolentseva
DATE: 9/21/12
REV. D
SCALE: 3:1