TS-SG-01-3.0 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – To be used with swivel lid sockets

TS-SG-01-X.X Drawing
Top View
Ø 36
22.27mm
Side View
Laser Mark
Compression Screw Top: Clear anodized
1 Aluminum.
2
Compression Screw Bottom: Black anodized
Aluminum M18 x1.5x6g Thread. 5mm Thread ht.
Note: Screw needs to be calibrated for a specific
torque.
Use part numbers shown in the table below to
order appropriate screw
Ordering
Information
44.7
1
2
M18x1.5x6g.
Part Number
TS-SG-01-3.0
TS-SG-01-3.5
TS-SG-01-4.0
TS-SG-01-4.5
TS-SG-01-5.0
TS-SG-01-5.5
TS-SG-01-6.0
TS-SG-01-6.5
TS-SG-01-7.0
TS-SG-01-7.5
TS-SG-01-8.0
TS-SG-01-8.5
TS-SG-01-9.0
TS-SG-01-9.5
TS-SG-01-10.0
Torque (in. lbs)
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
Description: Torque Indicating Screw
Torque screw for 3 in lbs -10 in lbs
To be used with swivel lid sockets.
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Swivel lid socket with Torque
Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
TS-SG-01-X.X Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: Vinayak R
File: TS-SG-01-X_X Dwg
Scale: N/A
Rev: C
Date: 5/7/08
Modified: 01/07/10