SS-QFN68A-01 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
A
30.23mm
[1.190"]
A
Side View
(Section AA)
11
25.48mm [1.003"]
4
37.81mm
[1.489"]
+ IC thickness
Customer's PCB
10
1
3
2
6
5
9
8
7
SS-QFN68A-01 Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
PO BOX21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: Ranjit Patil
File: SS-QFN68A-01 Dwg
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
Materials:
Clam Shell Lid: Black anodized 7075 Aluminum.
1 Height = 16.5 mm.
Socket Base: Black anodized 7075 Aluminum.
2 _{Height = 6 mm.}
3 ^{Compression Plate: Black anodized 7075}
Aluminum.
Thickness = 8.5 mm.
4
Compression Screw: Clear anodized 7075
Aluminum.
Height = 25 mm, Fluted Knob
Pogo Pin:
5 ^{Plungers - Hardened Steel/ Gold plated}
Barrel - Copper Alloy/ Gold plated
Spring - Stainless Steel/ Gold wire
6 Pogo Pin Guides: Ultem 1000.
7
Socket Base Screw: Socket Head Cap Screw,
Alloy Steel, 0-80 Thread, 5/8" long.
8 ^{Backing Plate: Black anodized 7075 Aluminum.}
Thickness= 4mm
9 Insulation Plate: FR4/G10
Pogo Pin Guide Screw: Pan head phillips, 18-8
10 ^SS,
0-80 thread, 3/16" long.
11 Latch: Black anodized 7075 Aluminum.
Scale: 1.25:1 Rev: A
Date: 4/25/06
Modified:
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4