SS-QFE240SF-01 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
42.725mm
A
42.725mm
GHz QFP Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable spring pin connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 7.5mm.
A
3 ^{Compression Plate: Ultem 1000}
1
14.23mm
6
Side View
10
(Section AA)
9
4
37.52mm
3
Recommended Torque = 6 in-lbs.
8
2
5
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Pogo Pin:
5
Plungers - Hardened Steel/ Gold plated
Barrel - Copper Alloy/ Gold plated
Spring - Stainless Steel/ Gold wire
Pogo Pin Guides: Ultem 1000.
6
Socket base screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 12.7mm long.
Socket lid screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 4.76mm long.}
Backing Plate: Black anodized Aluminum.
9 _{Thickness = 6.35mm.}
Customer's Target PCB
10 ^{Insulation Plate: FR4/G10, Thickness = 6.35mm.}
11 ^{Pogo Pin Guide Screw: Pan head phillips, 18-8 SS,}
0-80 thread, 3/16" long.
SS-QFE240SF-01 Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SS-QFE240SF-01 Dwg
Scale: -
Rev: A
Date: 9/26/06
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4