SS-BGA680C-01 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Compression plate distributes evenly

58.10mm
A
62.73mm
A
Top View
4
1
39.7mm
+ IC height
3
2
10
Front View
Section A-A
9
7
8
Description: BGA Test Socket
680 position BGA test socket.
SS-BGA680C-01 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Features
12
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes evenly
Clamshell lid
Side View
11
Probe Specification:
Minimum pitch: 0.020" (0.5mm)
Signal path length: 0.093" (2.37mm)
Force per contact: 27g (0.96oz.) at operating
position.
Device compliance: 0.006" (0.15mm)
DUT Board Compliance: 0.006" (0.15mm)
Operating Temp.: -55C to +150C
Insertions: >500,000
5
6
Initial position
Operating position
Status: Released
Scale: 1.25:1 Rev: A
Drawing: E Smolentseva
Date: 3/4/10
File: SS-BGA680C-01 Dwg
Modified:
Materials:
Clam Shell Lid: Black anodized Aluminum.
1 _{Height = 20 mm.}
Socket Base: Black anodized Aluminum.
2 _{Height = 6 mm.}
3 ^{Compression Plate: Black anodized Aluminum.}
Thickness = 12 mm.
4 ^{Compression Screw: Clear anodized Aluminum.}
Height = 27 mm, Fluted Knob
Pogo Pin:
5 Plungers - Full hard beryllium copper, gold
plated
Barrel - Nickel/ Silver, gold plated
Spring - Stainless Steel, gold plated
Electrical Specifications:
Impedance: 50W
Current Carrying: 5 amps continuous.
Typical Resistance: <50 mW
Inductance: 1.1nH
6 ^{Pogo Pin Guides: Ceramic Filled Peek}
7 ^{Socket Base Screw: Socket Head Cap Screw,}
Black Oxide, 0-80 Thread, 15.875mm (5/8")
long.
8 ^{Backing Plate: Black anodized Aluminum}
9 ^{Insulation Plate: FR4/G10}
10
Pogo Pin Guide Screw: Pan head phillips, 18-8
SS, 0-80 thread, 4.76mm (3/16") long.
11 Latch: Black anodized Aluminum.
12 IC Guide: Ultem
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4