SS-BGA625A-01 Datasheet, PDF (1/5 Pages) Ironwood Electronics. – Minimum real estate required

Top View
A
57.225mm
[2.253"]
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes evenly
Clamshell lid
A
A
50.60mm [1.992"] ₁₁
Assembled 36.4mm
+ IC thickness
7.21mm
Side View
(Section AA)
10 _{Customer's PCB}
7
SS-BGA625A-01 Drawing
© 2006 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
4
1
3
2
6
5
9
8
Status: Released
Drawing: H. Hansen
File: SS-BGA625A-01 Dwg
Materials:
Clam Shell Lid: Black anodized 7075 Aluminum.
1 Height = 20 mm.
Socket Base: Black anodized 7075 Aluminum.
2 _{Height = 6 mm.}
3 ^{Compression Plate: Black anodized 7075}
Aluminum.
Thickness = 12 mm.
4
Compression Screw: Clear anodized 7075
Aluminum.
Height = 27 mm, Fluted Knob
Pogo Pin:
5 ^{Plungers - Hardened Steel/ Gold plated}
Barrel - Copper Alloy/ Gold plated
Spring - Stainless Steel/ Gold wire
6 ^{Pogo Pin Guides: Ultem 1000.}
Socket Base Screw: Socket Head Cap Screw,
7 _{Black Oxide, 0-80 Thread, 5/8" long.}
8 ^{Backing Plate: Black anodized 7075 Aluminum}
9 ^{Insulation Plate: FR4/G10}
Pogo Pin Guide Screw: Pan head phillips, 18-8
10 _SS,
0-80 thread, 3/16" long.
11 Latch: Black anodized 7075 Aluminum.
Scale: 1.25:1
Rev: A
Date: 2/8/06
Modified:
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 5