SS-BGA352A-01 Datasheet, PDF (1/5 Pages) Ironwood Electronics. – Minimum real estate required

Top View
A
57.225mm
[2.253"]
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
A
A
11
50.60mm [1.992"]
Assembled 41.4mm
+ IC thickness
5.18mm
Customer's PCB
Side View
(Section AA)
10
7
SS-BGA352A-01 Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
4
1
3
2
6
5
9
8
Materials:
Clam Shell Lid: Black anodized Aluminum.
1 _{Height = 20 mm.}
Socket Base: Black anodized Aluminum.
2 _{Height = 6 mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 12 mm.}
Compression Screw: Black anodized Aluminum.
4 _{Height = 27 mm, Fluted Knob}
Pogo Pin:
5 ^{Plungers - Hardened Steel/ Gold plated}
Barrel - Copper Alloy/ Gold plated
Spring - Stainless Steel/ Gold wire
6 Pogo Pin Guides: Ceramic filled peek or Torlon
Socket Base Screw: Socket Head Cap Screw,
7 alloy steel with black oxide finish, 0-80 Thread,
3/8" long.
8 ^{Backing Plate: Black anodized Aluminum}
9 Insulation Plate: FR4/G10
Pogo Pin Guide Screw: Pan head phillips, 18-8
10 ^SS,
0-80 thread, 3/16" long.
11 ^{Latch: Black anodized Aluminum.}
Status: Released
Drawing: J. Glab
File: SS-BGA352A-01 Dwg
Scale: N/A
Rev: A
Date: 2/13/08
Modified:
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 5