SS-BGA256E-01 Datasheet, PDF (1/5 Pages) Ironwood Electronics. – Minimum real estate required

Top View
A
39.23mm
[1.544"]
A
Side View
(Section AA)
32.60mm [1.283"]
11
4
35.11mm
+ IC thickness
Customer's PCB
10
1
3
2
6
5
9
7
8
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
Materials:
Clam Shell Lid: Black anodized 7075 Aluminum.
1 _{Height = 18 mm.}
Socket Base: Black anodized 7075 Aluminum.
2 _{Height = 4.5 mm.}
Compression Plate: Black anodized 7075
3 _Aluminum.
Thickness = 9.5 mm.
4
Compression Screw: Clear anodized 7075
Aluminum.
Height = 23 mm, Fluted Knob
Pogo Pin:
5 Plungers - Hardened Steel/ Gold plated
Barrel - Copper Alloy/ Gold plated
Spring - Stainless Steel/ Gold wire
6 Pogo Pin Guides: Ultem 1000.
Socket Base Screw: Socket Head Cap Screw, alloy
7 _{steel with black oxide finish, 0-80 Thread, 5/8" long.}
8 ^{Backing Plate: Black anodized 7075 Aluminum}
9 ^{Insulation Plate: FR4/G10}
Pogo Pin Guide Screw: Pan head phillips, 18-8
10 _SS,
0-80 thread, 3/16" long.
11 _{Latch: Black anodized 7075 Aluminum.}
SS-BGA256E-01 Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Suite 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J. Glab
File: SS-BGA256E-01 Dwg
Scale: 1.25:1 Rev: C
Date: 2/16/07
Modified: 12/20/07
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 5