SS-BGA1156A-02 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Minimum real estate required

57.225mm
[2.253"]
1
A
Features
Directly mounts to target PCB (needs tooling
6
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
A
Top View
A
50.6mm [1.992"]
4
Assembled 41.4mm
+ IC thickness
3
5.18mm
2
5
9
Customer's PCB
Side View
10
(Section AA)
8
7
SS-BGA1156A-02 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Materials:
Clam Shell Lid: Black anodized Aluminum.
1 _{Height = 20 mm.}
Socket Base: Black anodized Aluminum.
2 _{Height = 6 mm.}
Compression Plate: Black anodized Aluminum.
3 Thickness = 12 mm.
11
4
Compression Screw: Clear anodized Aluminum.
Height = 27 mm
Pogo Pin:
5 ^{Plungers - Hardened Steel/ Gold plated}
Barrel - Copper Alloy/ Gold plated
Spring - Stainless Steel/ Gold wire
6 Pogo Pin Guides: Ceramic Filled Peek.
Socket Base Screw: Socket Head Cap Screw,
7 _{2-56 Thread, 5/8" long.}
8 Backing Plate: Black anodized Aluminum.
9 Insulation Plate: Ultem, 1.59mm thick.
Pogo Pin Guide Screw: Pan head phillips, 18-8
10 SS, 0-80 thread, 3/16" long.
11 Latch: Black anodized Aluminum.
Status: Released
Scale: -
Rev: A
Drawing: E Smolentseva
Date: 02/27/09
File: SS-BGA1156A-02 Dwg.mcd
Modified: 04/22/09
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4