SG-SOIC-3002 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

GHz Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
Top View
A
1
Socket Lid: Black anodized Aluminum.
Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
3 Compression Plate: Ceramic Filled Peek
4
Compression screw: Clear anodized Aluminum.
Thickness = 5mm, Hex socket = 5mm.
Elastomer: 20 micron dia gold plated brass
Recommended torque = 0.38 in-lb
5
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
R
Thickness = 0.5mm.
1
4
6
Elastomer Guide: Non-clad FR4.
Thickness = 0.475mm.
3
9
Assembled
8.25mm +
IC thickness
6
2
8 ₁₂
7
7 Lead Guide: Kapton Film
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
9
Socket lid screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 4.76mm long.
Side View
(Section AA)
10
11
Customer's IC
5
Customer's Target PCB
10 ^{Nylon washer}
11 ^{Hex nut}
12 IC Guide: Ultem 1000
SG-SOIC-3002 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Scale: -
Rev: A
Drawing: S. Faiz
Date: 10/20/10
File: SG-SOIC-3002 Dwg.mcd
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3