SG-QFE-7011 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
26.225mm
GHz QFP128 Socket - Direct mount,
solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
12
26.225mm
6
10
Customer's
QFP IC
SG-QFE-7011 Drawing
© 2012 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
A
4
3
Recommended torque = 3 in lbs.
9
2
87
5
11
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
3 ^{Compression Plate: Ultem 1000}
Compression screw: Black anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.5mm.}
7 ^{IC Guide: Torlon}
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
12 ^{Lead Guide: Kapton Polyamide 0.003" thick}
Customer's Target PCB
Status: Released
Drawing: Ranjit Patil
File: SG-QFE-7011 Dwg
Scale: -
Rev: B
Date: 01/10/2012
Modified: 03/27/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3