SG-QFE-7008 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
20.225mm
A
GHz QFP64 Socket - Direct mount,
solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
Side View
(Section AA)
12
6
20.225mm
1
4
3
Recommended torque is 2 in lb
9
8
2
7
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
3 ^{Compression Plate: Ultem 1000}
4 ^{Compression screw: Clear anodized Aluminum.}
Elastomer: 20 micron dia gold plated brass
5
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.5mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.475mm.}
7 ^{IC Guide: Torlon}
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 7.94 mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
12 ^{Lead Guide: Kapton Polyamide 0.002" thick}
10
Customer's QFP IC
SG-QFE-7008 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
5
11
Status: Released
Drawing: M.A. Fedde
File: C9508 Dwg
Scale: -
Rev: C
Date: 3/26/10
Modified: 5/7/2010
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3