SG-QFE-7003 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
32.5mm
GHz QFP176 Socket - Direct mount,
solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
12
6
10
32.5mm
4
3
5
Customer's
QFP IC
Recommended torque = 3 in lbs.
9
2
8
7
11
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
3 ^{Compression Plate: Ultem 1000}
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.475mm.}
7 ^{IC Guide: Ultem 1000}
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 4-40 fine thread , 9.525mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
10 ^{Socket base nut: 18-8 Stainless steel, 4-40 fine thread.}
Nylon washer: 3.04mm ID, 7.112mm OD, 0.6-0.96mm
11 _thickness.
12 ^{Lead Guide: Kapton Polyamide 0.003" thick}
SG-QFE-7003 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Ste 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Relased
Drawing: A. Evans
File: SG-QFE-7003 Dwg
Scale: -
Rev: C
Date: 6/18/08
Modified: 5/7/10
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3