SG-MLF-7072 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
15.225mm Sqr.
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Open TOP socket lid
A
Side View
(Section AA)
1
Assembled
5mm +IC thickness
5.85 mm Sqr.
9.35mm Sqr.
A
Recommended Torque 6 in-oz
7
2
6
5
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 4.725mm.}
2
Socket base: Black anodized Aluminum.
Thickness = 3mm.
Elastomer: 20 micron dia gold plated brass
3
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.5mm.
Elastomer Guide: Cirlex
4 _{Thickness = 0.475mm.}
5 ^{IC (MLF) Guide: Ultem1000}
Socket base screw: Socket head cap, Alloy steel with
6 black oxide finish, 0-80 fine thread , 7.94mm long.
Socket lid screw: Socket head cap, Alloy steel with
7 black oxide finish, 0-80 fine thread , 4.76mm long.
8
Socket base nut: 18-8 Stainless steel, 0-80 fine thread.
Nylon washer: 1.73mm ID; 4.78mm OD
9 0.64mm thickness.
4
8
Customer's
MLF
SG-MLF-7072 Drawing
© 2012 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
3
9
Customer's Target PCB
Status: Released
Drawing: S. Huang
File: SG-MLF-7072 Dwg.mcd
Scale: -
Rev: A
Date: 8/10/12
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3