SG-MLF-7062 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – IC guide prevents over compression of elastomer

Top View
17.225mm
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Side View
(Section AA)
Assembled
8.25mm +
IC thickness
17.225mm
1
4
3
6
10
5
Customer's IC
A
Recommended torque = 1.5 in. lbs.
(24 in. oz.)
9
2
8
7
11
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 3mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 2.5mm.}
Compression screw: Clear anodized Aluminum.
4 _{Thickness = 5mm, Hex socket = 3mm.}
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Cirlex
6 _{Thickness = 0.475mm.}
7 IC (MLF) Guide: Torlon 4203
Socket base screw: Socket head cap, Alloy steel with
8 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: 0-80 SS shoulder screw
9
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
SG-MLF-7062 Drawing
© 2012 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Scale: -
Rev: B
Drawing: E Smolentseva
File: SG-MLF-7062 Dwg.mcd
Date: 2/17/12
Modified: 11/11/14
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3