SG-MLF-7053 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – IC guide prevents over compression of elastomer

A
Top View
Assembled
8.25mm +
IC thickness
6
Side View
(Section AA)
10
1
11
4
3
QFN package
5
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Recommended torque =1.25 in lbs./
20.0 in oz.
9
2
8
7
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 2.5mm.}
Compression screw: Clear anodized Aluminum.
4 _{Thickness = 5mm, Hex socket = 3mm.}
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Cirlex
6 Thickness = 0.475mm.
7 ^{IC (MLF) Guide: Ultem1000}
Socket base screw: Socket head cap, Alloy steel with
8 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: Socket head cap, Alloy steel with
9 _{black oxide finish, 0-80 fine thread , 4.76mm long.}
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thickness.
SG-MLF-7053 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Suite 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: S. Faiz
File: SG-MLF-7053 Dwg.mcd
Scale: -
Rev: A
Date: 9/15/10
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3