SG-MLF-7006 Datasheet, PDF (1/5 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
12.225mm
A
Side View
(Section AA)
Assembled
6.95mm +
IC thickness
12.225mm
1
4
3
6
10
5
Customer's
MLF
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Recommended torque = 1.25 in. lbs.
(20 in. oz.)
9
2
8
7
11
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 3mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 1.5mm.}
Compression screw: Clear anodized Aluminum.
4 _{Thickness = 5mm, Hex socket = 3mm.}
Elastomer: 20 micron dia gold plated brass
5
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.5mm.
Elastomer Guide: Cirlex
6 _{Thickness = 0.475mm.}
7 ^{IC (MLF) Guide: Torlon}
Socket base screw: Socket head cap, Alloy steel with
8 ^{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
Customer's Target PCB
SG-MLF-7006 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SG-MLF-7006 Dwg.mcd
Scale: -
Rev: K
Date: 10/22/02
Modified: 05/07/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 5