SG-MLF-7001 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
12.225
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Side View
(Section AA)
1
Assembled
6.95mm +
IC thickness
12.225
6
10
Customer's
MLF
SG-MLF-7001 Drawing
© 2012 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
A
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 3mm.}
4
3
Recommended torque = 0.5 in. lbs.
(8 in. oz.)
9
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 1.5 mm.}
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 3mm.
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Cirlex.
6 _{Thickness = 0.475mm.}
2
8
7
5
11
Customer's Target PCB
7 ^{IC (MLF) Guide: Torlon 4203}
Socket base screw: Socket head cap, Alloy steel with
8 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
11
Nylon washer: 1.73mm ID; 4.78mm OD
0.64mm thickness.
Status: Released
Drawing: H. Hansen
File: SG-MLF-7001 Dwg.mcd
Scale: -
Rev: K
Date: 10/22/02
Modified: 11/11/14
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3