SG-MLF-7000 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
15.225mm
A
Side View
(Section AA)
Assembled
6.95mm +
IC thickness
15.225mm
1
4
3
6
10
5
Customer's
MLF
GHz MLF Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
IC guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 3mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 1.5mm.
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 3mm.
Recommended torque = 1.5 in. lbs.
(24 in. oz.)
9
Elastomer: 20 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.5mm.
Elastomer Guide: Cirlex
6 _{Thickness = 0.475mm.}
2
8
7
7 ^{IC (MLF) Guide: Torlon}
8
Socket base screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
11
Customer's Target PCB
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thickness.
SG-MLF-7000 Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Ste 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SG-MLF-7000 Dwg.mcd
Scale: 3:1
Rev: J
Date: 9/11/02
Modified: 05/06/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3