SG-BGA-7188 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
15.225mm
15.225mm
A
Side View
(Section A-A)
4
9.96mm
3
10
6
11
5
12
SG-BGA-7188 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
Socket includes additional
20 nylon washers
20 hex nuts
20 socket base screws
Recommended torque is 6 in oz
13
9
1
2
7
8
1 ^{Socket Lid: Black anodized Aluminum.}
Thickness = 2.5mm.
Socket base: Black anodized Aluminum.
2 _{Thickness = 3mm.}
Compression Plate: Black anodized
3 _{Aluminum. Thickness = 2.3mm.}
Compression screw: Clear anodized
4 _Aluminum.
Thickness = 5mm, Hex socket = 3mm.
Elastomer: 20 micron dia gold plated brass
filaments arranged symmetrically in a
5 _{silicone rubber (63.5 degree angle).}
Thickness = 0.5mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.475mm.}
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Socket head cap, alloy
8 _{steel with black oxide finish, 0-80 fine thread ,}
9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8
SS, 0-80 fine thread.
10 ^{IC Guide: Kapton polyimide.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thickness.
12
Hex nut: 18-8 Stainless steel, 0-80 fine
thread.
13 ^{Locking nut: 18-8 Stainless steel, M5}
Status: Released
Scale: 1:0.2
Rev: A
Drawing: E Smolentseva
Date: 10/25/2010
File: SG-BGA-7188 Dwg
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 5