SG-BGA-7083 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

12.225mm
12.225mm
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
A
Top View
1
Assembled
8.55mm +
IC thickness
6
Recommended torque = 2.1 Ncm (3 ozf in)
4
3
9
2
8
12
7
Side View ₁₀
(Section AA)
11
Customer's
5
BGA IC
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 2.5mm.}
Compression screw: Clear anodized Aluminum.
4 _{Thickness = 5mm, Hex socket = 5mm.}
Elastomer: 20 micron dia gold plated brass
5
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.5mm.
6
Elastomer Guide: Non-clad FR4.
Thickness = 0.475mm.
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 12.7mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
10 ^{Insulation Plate: FR4/G10, Thickness = 1.59mm.}
Backing Plate: Black anodized Aluminum.
11 _{Thickness = 6.35mm.}
12 IC Guide: Torlon
SG-BGA-7083 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Ste 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J. Glab
File: SG-BGA-7083 Dwg
Scale: -
Rev: D
Date: 1/26/07
Modified: 8/9/16
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4