SG-BGA-6342 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
18.225mm
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
12
18.225mm
6
10
Customer's
BGA IC
SG-BGA-6342 Drawing
© 2011 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
4
3
3
4
Recommended torque = 1 in lbs.
5
9
6
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
Compression screw: Clear anodized Aluminum.
Thickness = 5mm, Hex socket = 5mm.
Elastomer: 40 micron dia gold plated brass
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
Thickness = 0.725mm.
2
8
7
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Socket head cap, Alloy steel with
8 black oxide finish, 0-80 fine thread , 9.525mm long.
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
5
11
Customer's Target PCB
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
12 ^{IC guide: Ultem.}
Status: Released
Drawing: M. Raske
File: SG-BGA-6342 Dwg.mcd
Scale: -
Rev: A
Date: 9/21/2011
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3