SG-BGA-6321 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
15.225mm
A
Side View
(Section AA)
Assembled
8.25mm +
IC thickness
12
15.225mm
1
6
10
Customer's
BGA IC
SG-BGA-6321 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Suite 400 Burnsville MN 55337
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
A
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 3mm.
4
3
Recommended torque = 0.5-1.0 in lbs.
( 8-16 in-oz)
9
2
8
7
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.725mm.}
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Socket head cap, 18-8 Stainless
steel, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
5
11
Customer's Target PCB
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thick.
12 ^{IC Guide: 0.5mm thick.}
Status: Released
Drawing: S.Natarajan
File: SG-BGA-6321 Dwg.mcd
Scale: -
Rev: A
Date: 04/7/2010
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3