SG-BGA-6292 Datasheet, PDF (1/5 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
16.8 mm
20.8mm
23.8mm
A
Assembled
8.25mm +
IC thickness ₈
7
6
Side View
(Section AA)
11
Customer's
BGA IC
SG-BGA-6292 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
A
open lid
Recommended torque = 6 in oz.
4
9
1
3
2
12
5
10
Customer's Target PCB
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
Compression screw: Clear anodized Aluminum.
4 _{Thickness = 5mm, Hex socket = 5mm.}
Elastomer: 40 micron dia gold plated brass
5 ^{filaments arranged symmetrically in a silicone}
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.725mm.}
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Socket head cap, Alloy steel with
8 black oxide finish, 0-80 fine thread , 9.525mm long.
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 _{0.64mm thickness.}
12 ^{IC Guide: Torlon}
Status: Released
Scale: -
Rev: C
Drawing: E Smolentseva
Date: 10/22/09
File: SG-BGA-6292 Dwg.mcd
Modified: 11/17/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 5