SG-BGA-6237 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
without fan
1
Side View
(Section AA)
29.93mm (Approx)
13
11
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
9
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
1 ^{DC Fan: 40x40x10mm, 12VDC, with speed sensor}
2
Socket base: Black anodized Aluminum.
Thickness = 7.5mm.
4
10
3 ^{Heat Sink, 40x40x10mm, Clear Anodized Aluminum}
Fan Screw : Flat Head, Stainless Steel, 16mm lg,
4 _M4-0.7mm
Recommended torque = 1.87 in lbs.
3
Elastomer: 40 micron dia gold plated brass
filaments arranged symmetrically in a silicone
5 _{rubber (63.5 degree angle).}
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.75mm.}
8
2
7
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Socket head cap, Alloy steel with
8 _{black oxide finish, 0-80 fine thread , 15.875mm long.}
Compression screws: Socket head cap, Alloy steel with
9 _{black oxide finsh, 0-80 fine thread , 12.7 mm long.}
Compression screws: Socket head cap, Alloy steel with
10 black oxide finsh, 0-80 fine thread , 9.53mm long.
11 ^{Insulation Plate: FR4/G10, 1.59mm thick.}
12 ^{Backing Plate: Anodized Aluminum 6.35mm thick.}
13 ^{Gap Pad 0.015 inch thick}
6
Customer's
12
BGA IC
5
Customer's Target PCB
SG-BGA-6237 Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J. Glab
File: SG-BGA-6237 Dwg.mcd
Scale: -
Rev: A
Date: 09/05/07
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4