SG-BGA-6222 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Top View
15.12mm
GHz BGA Socket - Epoxy mount, solderless
Features
Directly mounts to target PCB (needs epoxy) .
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable socket lid
A
Side View
(Section AA)
1
Assembled
8.0mm +
IC thickness
18.13mm
A
Recommended torque 1.5 in lb.
4
6
3
2
Epoxy
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
Socket base: Black anodized Aluminum.
2 _{Thickness = 5mm.}
Compression Plate: Black anodized Aluminum.
3 _{Thickness = 2.5mm.}
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 40 micron dia gold plated brass
5 ^{filaments arranged symmetrically in a silicone}
rubber (63.5 degree angle).
Thickness = 0.75mm.
6
Socket lid screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 4.76mm long.
Customer's
BGA IC
14.21mm
SG-BGA-6222 Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Note: Alignment guide for positioning socket
base to target PCB will be supplied.
5
Customer's Target PCB
Status: Released
Scale: -
Rev: B
Drawing: J. Glab
File: SG-BGA-6222 Dwg
Date: 09/04/07
Modified: 07/31/14
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 OF 4