SG-BGA-6189 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
32.225mm
A
Side View
(Section AA)
1
Assembled
9.75mm +
IC thickness
32.225mm
10
6
Customer's
BGA IC
SG-BGA-6189 Drawing
© 2006 IRONWOOD ELECTRONICS, INC.
11351 Rupp Dr. Suite 400 Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
A
2
Socket base: Black anodized Aluminum.
Thickness = 6.5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 3mm.
4
3
Recommended torque = 6 in lbs.
9
2
8
7
Compression screw: Black anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.725mm.}
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Fillister head, Alloy steel with
8 _{black oxide finish, 0-80 fine thread , 12.7mm long.}
9
Socket lid screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 6.35mm long.
5
11
Customer's Target PCB
10 Insulation Plate: FR4/G10, 1.59mm thick.
11 ^{Backing Plate: Anodized Aluminum 6.35mm thick.}
Status: Released
Scale: -
Rev: A
Drawing: Meghann Fedde
Date: 9/26/06
File: SG-BGA-6189 Dwg
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4