SG-BGA-6177 Datasheet, PDF (1/5 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
60 mm
A
7
Max Height
TBD
6
BGA IC
Side View
4
(Section AA)
SG-BGA-6177 Drawing
© 2006 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Heat sink lid for power dissipation
Additional set of socket lid, compression plate, compression screw and
socket lid screws to be used without the heat sink lid.
Heatsink Lid: Black anodized 6061 Aluminum.
1 _{Thickness = 16mm.}
Socket base: Black anodized 6061 Aluminum.
2 Thickness = 6.5mm.
A
Elastomer: 40 micron dia gold plated brass
3 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Cirlex or equivalent.
4 _{Thickness = 0.75mm.}
Ball Guide: Kapton polyimide.
5 _{Thickness = 0.25mm.}
Socket base screw: Socket head cap, Alloy steel with
6 _{black oxide finish, 0-80 fine thread , 9.525mm long.}
Socket lid screw: Socket head cap, Alloy steel with
1
7 _{black oxide finish, 0-80 fine thread , 4.76mm long.}
Torque =1 in-lbs/screw
8
Recommended torque for
the socket without heat sink lid 9
Backing Plate: Black anodized 6061 Aluminum.
Thickness = 6.35mm.
Insulation Plate: FR4/G10, Thickness = 1.59mm.
is 8.3 in lb
2
Compression Plate: Black anodized 6061 Aluminum.
10 Thickness = 2.5mm.
3
5
Target PCB
Compression screw: Clear anodized 6061 Aluminum.
11 _{Thickness = 5mm, Hex socket = 5mm.}
9
8
Socket lid screw: Socket head cap, Alloy steel with
12 _{black oxide finish, 0-80 fine thread , 4.76mm long.}
13 ^{IC Frame: Ultem 1000.}
Status: Released
Drawing: Nidhi Sen
File: SG-BGA-6177 Dwg.mcd
Scale: 1:0.7
Rev: A
Date: 06/23/06
Modified:
PAGE 1 of 5
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.