SG-BGA-6154 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

15.225mm
A
Top View
15.225mm
1
Assembled
8.25mm +
IC thickness
12
Side View
(Section AA)
6
10
Customer's
BGA IC
SG-BGA-6154 Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
4
3
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
1
Socket Lid: Black anodized Aluminum.
Thickness = 2.5mm.
A
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
4
Compression screw: Clear anodized Aluminum.
Thickness = 5mm, Hex socket = 5mm.
Recommended torque = 0.38 in lbs.
(6 in oz.)
9
Elastomer: 40 micron dia gold plated brass
5
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
6
Elastomer Guide: Cirlex
Thickness = 0.725mm.
7 Ball Guide: Kapton polyimide.
2
8
7
8
Socket base screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
11
5
Customer's Target PCB
11
Nylon washer: 1.73mm ID; 4.78mm OD
0.64mm thickness.
12 ^{IC Guide: Torlon}
Status: Released
Drawing: H. Hansen
File: SG-BGA-6154 Dwg
Scale: -
Rev: D
Date: 5/24/05
Modified: 04/10/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3