SG-BGA-6153 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
32.225mm
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Side View
1
(Section AA)
Assembled
8.25mm +
IC thickness
12
32.225mm
10
6
Customer's
BGA IC
SG-BGA-6153 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
PO BOX21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Socket Lid: Black anodized Aluminum.
A
1 Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
4
3
5
Recommended torque = 8 - 9 in lbs.
9
2
8
7
11
Customer's Target PCB
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.725mm.}
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Fillister head, Alloy steel with
black oxide finish, 0-80 fine thread , 12.7mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
10 ^{Insulation Plate: FR4/G10, 1.59mm thick.}
11 ^{Backing Plate: Anodized Aluminum 6.35mm thick.}
12 ^{IC Frame: Ultem 1000.}
Status: Released
Drawing: H. Hansen
File: SG-BGA-6153 Dwg
Scale: -
Rev: C
Date: 5/24/05
Modified: 5/19/09
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4