SG-BGA-6152 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
17.225mm
A
Side View
(Section AA)
12
1
Assembled
8.25mm +
IC thickness
17.225mm
6
10
Customer's
BGA IC
SG-BGA-6152 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Ø 6mm
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
Socket Lid: Black anodized Aluminum.
A
1 Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm. (x2)
Recommended torque = 1-3 in lbs.
4
3
Recommended torque = 1 in lbs. / screw
9
2
8
7
5
11
Customer's Target PCB
4
Compression screw: Black anodized Aluminum.
3-48 thread (x4)
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.75mm.}
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thickness.
Compression screw: Black anodized Aluminum.
12 _{Thickness = 5mm, Hex socket = 3mm.}
Status: Preliminary
Drawing: M.A.Fedde
File: SG-BGA-6152 Dwg.mcd
Scale: -
Rev: C
Date: 4/14/05
Modified: 6/12/09, AE
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3