SG-BGA-6132 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
40.225mm
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
6
40.225mm
4
5
Assembled
8.25mm +
IC thickness
1
4
SG-BGA-6132 Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Socket Lid: Black anodized Aluminum.
1 _{Thickness = 2.5mm.}
Recommended torque = 24 in lbs.
3
9
2
Socket base: Black anodized Aluminum.
2 ^{All holes are 0-80 tapped.}
Thickness = 6.5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
4
Compression screw: Clear anodized Aluminum.
Thickness = 5mm, Hex socket = 5mm.
7
8
Customer's Target PCB
2
Customer's
BGA IC
9
Recommended torque = 24 in lbs.
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
6
Elastomer Guide: Cirlex or equivalent.
Thickness = 0.75mm.
7 ^{Ball Guide: Kapton polyimide.}
Socket base screw: Socket head cap, alloy steel with
8 _{black oxide finish, 0-80 fine thread , 12.7mm long.}
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
9 _thread.
Status: Released
Drawing: H. Hansen
File: SG-BGA-6132 Dwg
Scale: -
Rev: B
Date: 9/13/05
Modified: 5/19/09
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3