SG-BGA-6105 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
19.225mm
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
19.225mm
6
10
Customer's
BGA IC
SG-BGA-6105 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
A
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
4
3
5
12
Recommended torque = 1 in lbs.
TL-TORQUEDRIVER-06 tool is
available from IE to purchase.
9
2
8
7
11
Customer's Target PCB
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
Compression screw: Clear anodized Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.725mm.}
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thickness.
12 IC Guide: Torlon.
Status: Released
Drawing: H. Hansen
File: SG-BGA-6105 Dwg.mcd
Scale: -
Rev: C
Date: 3/18/04
Modified: 05/20/14, DH
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3