SG-BGA-6100 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
12.225mm
A
Side View
(Section AA)
1
Assembled
8.25mm +
IC thickness
12.225mm
6
10
Customer's
BGA IC
SG-BGA-6100 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
Socket Lid: Black anodized 6061 Aluminum.
1 Thickness = 2.5mm.
A
2
Socket base: Black anodized 6061 Aluminum.
Thickness = 5mm.
3
Compression Plate: Black anodized 6061 Aluminum.
Thickness = 2.5mm.
Compression screw: Black anodized 6061 Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
4
3
Recommended torque = 0.38 in lbs.
(6 in oz.)
5
9
6
Elastomer: 40 micron dia gold plated brass
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
Thickness = 0.75mm.
2
8
7
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 4.76mm long.
5
12
11
Customer's Target PCB
10 ^{Socket base nut: 18-8 Stainless steel, 0-80 fine thread.}
Nylon washer: 1.73mm ID; 4.78mm OD
11 0.64mm thickness.
IC Guide: Ultem 1000
12 0.60mm thickness.
Status: Released
Drawing: H. Hansen
File: SG-BGA-6100 Dwg.mcd
Scale: -
Rev: B
Date: 2/16/04
Modified: 4/3/06, MT
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3