SG-BGA-6083 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
32.225mm
A
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
A
Socket Lid: Black anodized Aluminum.
1 Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
32.225mm
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
Side View
(Section AA)
1
8.6mm
Recommended torque = 4 in lbs.
4
9
3
2
8
7
Lid Screw: 1/2"-20 Alloy Steel Screw.
4 _{Height = 12.7mm.}
Elastomer: 40 micron dia gold plated brass
5 filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.75mm.}
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 9.525mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
10 ^{Insulation Plate: FR4/G10, 1.59mm thick.}
6
5
Elastomer opening Customer's
11 _{for cavity down IC BGA IC}
11
10
Customer's Target PCB
SG-BGA-6083 Drawing
Status: Released
Scale: -
Rev: B
© 2003 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Drawing: H. Hansen
File: SG-BGA-6083 Dwg.mcd
Date: 7/28/03
Modified: 5/19/09
Backing Plate: Black anodized Aluminum, Thickness
= 6.35mm.
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4