SG-BGA-6073 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

Top View
(without heat sink lid)
82.5mm
45.225mmSqr.
82.5mm
A
Top View of Heat Sink Lid
Ø 3.12mm(x4)
Lid mounting hole for 4-40 screw
Ø 1.5mm(x3)
Dowel pin
A
A1 Orientation mark
Ø 6.5mm(x4)
Counter sunk 82 deg
to accept 4-40 Flat head screw
7
Side View at AA
8
5
1
6
3.25mm
1.6mm
4
2
3
9
10
Note: Package cavity(45.225mm square) is offset by 0.375mm to the left from the centerline.
Socket base: Black anodized 6061 Aluminum.
1 Thickness = 2.25mm.
Elastomer: 40 micron dia gold plated brass
filaments arranged symmetrically in a silicone
2 _{rubber (63.5 degree angle).}
Thickness = 0.75mm.
3
Elastomer Guide: Non-clad FR4.
Thickness = 0.75mm.
4 Ball Guide: Kapton polyimide. Thickness = 0.25mm
5 ^{Socket base screw: Flat head, 18-8 Stainless steel,}
4-40 thread , 1/2" long.
6
Alignment pin: Dowel pin, 18-8 Stainless steel,
1.5mm dia.
7 Socket Lid Screw: Alloy steel, 4-40 thread, 3/4" length
8 ^{Heat Sink Lid}
Insulation Plate: 3.63mm thick
9
10 ^{Backing Plate: 4.76mm thick}
SG-BGA-6073 Drawing
© 2002 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SG-BGA-6073 Dwg.mcd
Scale: 1:1
Rev: A
Date: 11/7/02
Modified:
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4