SG-BGA-6057 Datasheet, PDF (1/3 Pages) Ironwood Electronics. – Ball guide prevents over compression of elastomer

Top View
30.5mm
Side View
40.1mm
1
Assembled
8.25mm +
IC thickness
6
10
SG-BGA-6057 Drawing
© 2002 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
GHz BGA Socket - Direct mount, solderless
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
Socket Lid: Black anodized 6061 Aluminum.
1 Thickness = 2.5mm.
2
Socket base: Black anodized 6061 Aluminum.
Thickness = 5mm.
4
9
Recommended torque = 4 - 6 in lbs.
8
2
7
11
Customer's Target PCB
Compression Plate: Black anodized 6061 Aluminum.
Thickness = 2.5mm.
Compression screw: Black anodized 6061 Aluminum.
4 Thickness = 5mm, Hex socket = 5mm.
Elastomer: 40 micron dia gold plated brass
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
Elastomer Guide: Non-clad FR4.
6 _{Thickness = 0.75mm.}
7 ^{Ball Guide: Kapton polyimide.}
8
Socket base screw: Philips round head, alloy steel
with black oxide finish, 2-56 fine thread , 12.7mm long.
9
Socket lid screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 4.76mm long.
10 ^{Socket base nut: 18-8 Stainless steel, 2-56 fine thread,}
4.76mm width, 1.59mm height.
Nylon washer: 2.4mm ID; 4.76mm OD
11 0.5mm thickness.
Status: Released
Drawing: H. Hansen
File: SG-BGA-6057 Dwg.mcd
Scale: 2:1
Rev: B
Date: 8/13/02
Modified: 10/15/02
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 3